Installation of the air source heat pump

The installation of an air source heat pump is an important part that cannot be ignored. What are the steps of installation? What issues need to be noted during the installation process? These are all things that users should be concerned about and keep in mind. Next, we will explain the installation of air source heat pumps.

Here is the content list:

l Installation steps of air source heat pumps

l Installation precautions for air source heat pumps

Installation steps of air source heat pumps

1、First, before installing the host of the air source heat pump, you need to survey the installation site and select and determine the installation location of the host.

2、Second, make the foundation of the host equipment. If it is determined that the installation location of the heat pump is on the ground, cement can be used, and the thickness of the cement is about 15cm to 20cm.

3、Third, place the host and adjust the position of the unit to ensure that the host of the air-to-water heat pump is placed smoothly.

4、Fourth, connect the circuit system of the air-water heat pump following the requirements of the wiring diagram, including the power cord, pump, water temperature sensor, pressure switch, solenoid valve, etc.

5、Fifth, the water circuit pressure test. Test the pipeline connection of the air source heat pump for water leakage.

6、Sixth, the machine test run. Check the parameters of the system of the air-water heat pump.

7、Seventh, pipe insulation. For example, the use of rubber insulation materials to insulate the water system of the air source heat pump.

Installation precautions for air source heat pumps

1、First, the host has high requirements for the space environment of the installation. Air source heat pumps have high requirements for the space environment of installation, with different requirements for installation in different locations. If installed on the ground or the wall, to ensure that the heat absorption of host heat exchanger and dissipation are not obstructed, the distance between the host of the heat pump and the surrounding walls or other obstructions can not be too small. In addition, the foundation of the equipment should be well done. If it is installed on the roof, the load-bearing capacity of the roof should be considered. In addition, pay attention to the heat pump air outlet direction. The direction of the air coming out of the host is best installed downwind so that the heat exchange effect of the host will be good.

2、Secondly, it is important to build a good foundation. The foundation of the equipment must be made solid and sturdy. When placing and adjusting the host of the heat pump, be smooth, ensure upright installation, and be fixed with expansion bolts. In addition, vibration-damping measures need to be taken between the main unit and the bottom foundation. The rigid pipeline connecting the main unit should adopt the spring shock-absorbing bracket to avoid the pipeline transferring the vibration to the building structure.

3、Third, for the heat pump, to do a good job to prevent rain and snow and other measures. During the installation process, it is also necessary to consider the drainage, rain, and snow protection, lightning protection, and maintenance space of the host equipment. If these details are not considered in place, it will directly affect the heating effect and service life of the heat pump.

If you want to know more information about the air source heat pump, please consult us. The website is www.inverter-heatpump.com.