Installation position and considerations for house heating heat pumps

A house heating heat pump is a unit that generates heat by absorbing heat from the air. It varies with the ambient temperature. The higher the ambient temperature, the better the room heating heat pump produces heat and consumes less energy. Using room heating heat pumps can bring no small convenience to life. So, what is the installation position of the house heating heat pump? What are the considerations when installing it? Next, we will answer these questions.

Here is the content list:

l Installation position of house heating heat pumps

l Installation considerations for house heating heat pumps

Installation position of house heating heat pumps

1、The water pump should be installed horizontally. The house heating heat pump should be installed horizontally when installing the water pump because the cooling of the pump is by the medium. If it is installed vertically, the flow of the medium will vary and it will not be able to cool the motor well. In this way, the temperature of the pump will be easy to burn out the motor.

2、The water pump should be installed at the lower circulation of the system. As the room heating heat pump is a more advanced device in the heating equipment, the system installation is more complex. If pump d is installed at a higher position, the pressure at the top of the system is relatively small. When it is lower than the saturation pressure corresponding to the working water temperature, it will cause some of the liquid to evaporate. When the evaporated bubbles enter the area with higher pressure, they are suddenly condensed under pressure. So the surrounding liquid is replenished here, resulting in hydraulic shock, a phenomenon also known as cavitation.

3、The water pump of house heating heat pumps should be installed on the return side of the heat pump host. If the water pump is installed on the outlet side, it will cause the host heat exchanger to draw a vacuum, resulting in a drop in flow. The water temperature rises accordingly, which leads to a high-temperature alarm for the host. Bad heat exchange will affect the normal work of the host. Therefore, when installing the pump, it is best to install it on the return side of the heat pump, so that it is difficult to pump the vacuum.

Installation considerations for house heating heat pumps

1、The location where the house heating heat pump is installed should be able to withstand the weight of the equipment. It should neither increase the level of noise and vibration, block the air inlet and outlet, or be a confined space. Also consider the subsequent room heating heat pump maintenance, to set aside enough space for maintenance and repair.

2、To install a filter at the tap water inlet end of the mainframe of the house heating heat pump and the circulating heating water inlet end. This is done mainly to prevent damage to the rigid piping of the main unit from impurities. To avoid the pipeline to transfer vibration to the building, we can use the spring shock-absorbing bracket.

3、When installing a house heating heat pump, remember to install the water pressure gauge and thermometer as well. This can also facilitate the maintenance and repair of the unit and provide a reliable reference value for the flooring heating heat pump unit.

If you want to know more information about the house heating heat pump, please consult us. Our website is www.inverter-heatpump.com.