Introduction of the low temperature heat pump

Heat pump as a kind of energy-saving technology has received widespread attention from all over the world. The air source heat pump can draw abundant low-grade energy from the ambient atmosphere, and it is easy to use and less expensive to install, so it has become one of the most widely used among many types of heat pumps. So, what is a low temperature heat pump? Next, we will introduce this kind of heat pump in detail.

Here is the content list:

l Basic introduction of low temperature heat pumps

l The working principle of low temperature heat pumps

Basic introduction of low temperature heat pumps

The low temperature heat pump adopts the ultra-low temperature compressor and low temperature high-efficiency environmental protection refrigeration system 410A which is commonly used in cold areas in Europe. Low temperature heat pump unit has little heat decay when the ambient temperature drops significantly, which fully guarantees the heating effect and is commonly used by users in the EU market for heating and heating rooms in cold areas in winter and making domestic hot water. And its energy-saving effect is obvious, about 1/3 of the cost of other heating and heating equipment, so it is the primary choice for the trinity of heating, cooling, and domestic hot water for families, neighborhoods, hotels, hotels, villas, and other places.

The working principle of low temperature heat pumps

1、The low temperature heat pump is a device that uses gas as low-level heat for heating or water supply, and also for cooling in summer. Cold climate heat pumps can ensure normal heat production at -25 degrees Celsius for generator sets by quasi-two-stage reduction of the jet aircraft enthalpy heat pump unit system to complete the heat production of air-source heat pumps in severe cold areas.

2、The inverter air source house heating heat pump water heater unit is composed of four main components: evaporator, condenser, compressor, and expansion valve, which form a closed system and are filled with the appropriate amount of work material. The basic principle of inverter air to water house heating heat pump water heater unit operation is based on the principle of inverse card cycle. The liquid mass first absorbs the heat from the air in the evaporator and evaporates to form steam. The latent heat of vaporization is the recovered heat, and then compressed into high temperature and high-pressure gas by the compressor, and condensed into liquid liquefaction in the condenser to send the absorbed heat to the water that needs to be heated. The liquid mass is expanded by the expansion valve after the lowering of the expansion valve and returns to the expansion valve, absorbing heat and evaporating to complete a cycle, and so on and so forth, constantly absorbing heat from low temperature sources and outputting the heated water, directly reaching the predetermined temperature.

The above is about the introduction of the air to water heat pump. If you want to know more about our cold-climate heat pumps, please consult us. Our website is www.inverter-heatpump.com. HEEALARX INDUSTRY LIMITED is a professional international manufacturer of heat pumps with more than 10 years’ experience.